Install from github repo?

[stevef9432203]

Specifically triggercmd start up options. I am assuming options for starting as system start,syslog options , daemon, etc

[stevef9432203]

Well so far I've emulated the linux install script option and got thus far -

Startup cmd from my Linux workstation systemd service file
node /usr/share/triggercmdagent/resources/app/src/daemon.js --run /home/stevef/.TR

Startup Test of running as root ->>>

/tmp/mnt/Backup+Hub/gitrepo/TRIGGERcmd-Agent# node ./src/daemon.js --run /root/.TR
Running Linux daemon to run background tasks.
Run installdaemon.sh to install the triggercmdagent daemon so it runs during boot
Tokenfile: /root/.TRIGGERcmdData/token.tkn
ComputerIDfile: /root/.TRIGGERcmdData/computerid.cfg
Logging in with saved token to run background tasks.
Write backup completed.

|> Now connected to https://www.triggercmd.com.
___/ For help, see: http://bit.ly/2q0QDpf
(using sails.io.js node SDK @v1.2.1)
Connected at: Sun Feb 10 2019 12:59:47 GMT-0800 (PST)

{ message: 'Subscribed to 5c608a9f592b050016ee2fff!' }
Initiated command removals
{ message: 'Subscribed to 5c608a9f592b050016ee2fff!' }
Initiated command adds
Added Reboot
Added yum update
Added apt update

Damn it works

ps | grep node
13393 stever 3076 R grep node
27544 stever 1098m S node ./src/daemon.js --run /root/.TRIGGERcmdData

[Russ]

@stevef9432203, so are you good now?

[stevef9432203]

seems so, just got to create a entware start script in /opt/etc/init.d to start it.
Would you like a full install howto? This can be used with a lot of routers that support Entware

[Russ]

@stevef9432203, yes please!

[stevef9432203]

@stevef9432203 said in Install from github repo?:

node ./src/agent.js --console

=Current Installl notes-

Entware What is it -

Minimum Requirements - Extra storage (Small HD preferred,but will work with USB stick)
Also Router should have 128M or ram. The TriggerCMD will use about 25M of ram.

Entware - Is an addon for Embedded devices "Routers, Access Points, and Nas"
that with install of Entware Repo adds an addtional 2200 additional apps to what
is in your Router or Nas.

---->>>> https://entware.net/about.html

See https://github.com/Entware/Entware/wiki for supported devices 
and Installion notes.

Perform steps from wiki to install on your Device.

---

Once Entware is installed you need to perform these Steps

######################## INSTALL node-js and utils #################################

opkg update

Downloading http://bin.entware.net/mipselsf-k3.4/Packages.gz.
Updated list of available packages in /opt/var/opkg-lists/entware.

opkg upgrade

Downloading and updating installed Packages...

opkg install node-js

Installing node-js...

opkg install node-npm

Install node-npm.....

opkg install git-http

Installing git-http tools...

update npm

npm update npm

ths took 4 minutes now have patience...

###################################################################################

############################# Install TriggerCMD-Agent ############################
cd /mnt

Get Mount point

mount

ubi:rootfs_ubifs on / type ubifs (ro,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,mode=0755)
proc on /proc type proc (rw,relatime)
tmpfs on /var type tmpfs (rw,noexec,relatime,size=420k)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mtd:bootfs on /bootfs type jffs2 (ro,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
mtd:data on /data type jffs2 (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
/dev/mtdblock8 on /jffs type jffs2 (rw,noatime)
/dev/sda1 on /tmp/mnt/Backup+Hub type ext4 (rw,nodev,relatime,stripe=8191,data=ordered)

Your mount point is usually dev/sda1

on my router /dev/sda1 on {/tmp/mnt/Backup+Hub}

Now we need to change to the directory returned by you mount command ( not Mine)

cd /tmp/mnt/Backup+Hub

Now lets make a "gitrepo" directory

mkdir gitrepo

Now change to that directory

cd gitrepo

Now lets clone the from Github. -# https://github.com/rvmey/TRIGGERcmd-Agent.git #-

git clone https://github.com/rvmey/TRIGGERcmd-Agent.git
Cloning into 'TRIGGERcmd-Agent'...
remote: Enumerating objects: 65, done.
remote: Counting objects: 100% (65/65), done.
remote: Compressing objects: 100% (44/44), done.
remote: Total 809 (delta 35), reused 44 (delta 21), pack-reused 744
Receiving objects: 100% (809/809), 17.73 MiB | 11.22 MiB/s, done.
Resolving deltas: 100% (371/371), done.

Now install Agent dependencies

cd to TriggerCMD agent

cd TRIGGERcmd-Agent

Now udate dependcy files

npm install
npm WARN deprecated coffee-script@1.12.7: CoffeeScript on NPM has moved to "coffeescript" (no hyphen)
npm WARN deprecated istanbul@0.4.5: This module is no longer maintained, try this instead:
npm WARN deprecated npm i nyc
npm WARN deprecated Visit https://istanbul.js.org/integrations for other alternatives.
npm WARN deprecated jade@1.11.0: Jade has been renamed to pug, please install the latest version of pug instead of jade
npm WARN deprecated gulp-util@3.0.8: gulp-util is deprecated - replace it, following the guidelines at https://medium.com/gulpjs/gulp-util-ca3b1f9f9ac5
npm WARN deprecated gulp-util@2.2.20: gulp-util is deprecated - replace it, following the guidelines at https://medium.com/gulpjs/gulp-util-ca3b1f9f9ac5
npm WARN deprecated react-tools@0.13.3: react-tools is deprecated. For more information, visit https://fb.me/react-tools-deprecated
npm WARN deprecated constantinople@3.0.2: Please update to at least constantinople 3.1.1
npm WARN deprecated transformers@2.1.0: Deprecated, use jstransformer
npm WARN deprecated graceful-fs@3.0.11: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js
npm WARN deprecated circular-json@0.3.3: CircularJSON is in maintenance only, flatted is its successor.
npm WARN deprecated minimatch@2.0.10: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue
npm WARN deprecated minimatch@0.3.0: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue
npm WARN deprecated browserslist@1.7.7: Browserslist 2 could fail on reading Browserslist >3.0 config used in other tools.
npm WARN deprecated hoek@2.16.3: This version is no longer maintained. Please upgrade to the latest version.
npm WARN deprecated boom@2.10.1: This version is no longer maintained. Please upgrade to the latest version.
npm WARN deprecated cryptiles@2.0.5: This version is no longer maintained. Please upgrade to the latest version.
npm WARN deprecated minimatch@0.2.14: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue
npm WARN deprecated graceful-fs@1.2.3: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js

electron@4.0.0 postinstall /tmp/mnt/Backup+Hub/gitrepo/TRIGGERcmd-Agent/node_modules/electron-prebuilt-compile/node_modules/electron
node install.js
npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN triggercmdagent@1.0.1 No repository field.
npm WARN triggercmdagent@1.0.1 license should be a valid SPDX license expression
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.7 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})

Just ignore the WARN messages, it will run

added 1407 packages from 901 contributors, updated 1 package and audited 14059 packages in 164.529s

################################## Install the Agent ############################################

node ./src/agent.js --console
Run installdaemon.sh to install the triggercmdagent daemon so it runs during boot
Daemon install: false
No token exists. Login to request one.
prompt: token: c5NiIsImlhasdf1MDM3NTcyN30.hcOtGZ7U95kS1nhCi4P1asdfobug-Pn4LAFJSY
Token saved for next time.
Tokenfile: /root/.TRIGGERcmdData/token.tkn
ComputerIDfile: /root/.TRIGGERcmdData/computerid.cfg
Logging in with saved token to run foreground tasks.
Computer ID 5c68db4062f9b30017477972 saved for next time.
Write backup completed.
Initiated command removals

|> Now connected to https://www.triggercmd.com.
___/ For help, see: http://bit.ly/2q0QDpf
(using sails.io.js node SDK @v1.2.1)
Connected at: Sat Feb 16 2019 19:55:45 GMT-0800 (PST)

Initiated command adds
{ message: 'Subscribed to 5c68db406477972!' }
{ message: 'Subscribed to 5c68db406477972!' }
Added Gnome Editor

If you got these steps you are Alive!!! Control C to Stop

#########################################################

Startup cmd from my Linux workstation systemd service file
node /usr/share/triggercmdagent/resources/app/src/daemon.js --run /home/stevef/.TRIGGERcmdData

Startup Test of running as root ->>>

/tmp/mnt/Backup+Hub/gitrepo/TRIGGERcmd-Agent# /opt/bin/node ./src/daemon.js --run /root/.TRIGGERcmdData
Running Linux daemon to run background tasks.
Run installdaemon.sh to install the triggercmdagent daemon so it runs during boot
Tokenfile: /root/.TRIGGERcmdData/token.tkn
ComputerIDfile: /root/.TRIGGERcmdData/computerid.cfg
Logging in with saved token to run background tasks.
Write backup completed.

|> Now connected to https://www.triggercmd.com.
___/ For help, see: http://bit.ly/2q0QDpf
(using sails.io.js node SDK @v1.2.1)
Connected at: Sun Feb 10 2019 12:59:47 GMT-0800 (PST)

{ message: 'Subscribed to 5c608a9f592b050016ee2fff!' }
Initiated command removals
{ message: 'Subscribed to 5c608a9f592b050016ee2fff!' }
Initiated command adds
Added Reboot
Added yum update
Added apt update

Damn it works -

ps | grep node
13393 stever 3076 R grep node
27544 stever 1098m S node ./src/daemon.js --run /root/.TRIGGERcmdData

lets Create Entware Startup Script -

[Russ]

@stevef9432203, thank you for posting your steps!

[stevef9432203]

I've put a more complete install outline, in the Installs Sub-Forum. Let me know if its complete enough.

[Russ]

@stevef9432203, yes, I think that's good. Thank you for doing it. I don't have a router to verify every step, but the instructions look detailed enough that someone could follow it.

[stevef9432203]

Tested on Two asus Routers asus rt ac5300, asus gt-ac5300, and qnap nas

[Russ]

@stevef9432203, ooh, I do have a qnap nas I could try it on.

[stevef9432203]

Interesting issue pops up every few boots, two files dissapear; token.tkn and computerid
.cfg vanish after reboot. Kind of resembles lack flexible closure or no shutdown handling traps hup
Oct or kill..Gotta restore token.tkn to reboot sevices .

Comments? Or ?

..

[Russ]

@stevef9432203, please confirm - your commands.json stays when the router reboots, but your token.tkn file and computerid.cfg file go away? If so that's odd because the agent doesn't keep those two files open - it just reads them during startup.

[stevef9432203]

Yes the commands.json files stay intact. I will move content startup directory to hard disk storage to test. Can I specify the path to the data directory with the '--run' path prefix ?

[Russ]

@stevef9432203, no, but you could change this line to set your "homedir" to something else.

homedir = (process.platform === 'win32') ? process.env.HOMEPATH : process.env.HOME;

Or maybe you could symlink your ~/.TRIGGERcmdData folder to a path on your hard drive.