Raspberry Pi OS (64 bit)

[Călin Cătălin Alexandru]

i can't make it work on the Raspberry Pi OS (64 bit)
i have modified the file /root/.TRIGGERcmdData/commands.json
but is still showing the default commands on the site.

[
{"trigger":"Reboot","command":"shutdown -r","ground":"background","voice":"reboot","allowParams": "false"},
{"trigger":"Clear ram","command":"/home/pi/ram.sh","ground":"background","voice":"Clear ram","allowParams": "false"},
{"trigger":"Computer on","command":"/home/pi/wol.sh","ground":"background","voice":"Computer on","allowParams": "false"},
{"trigger":"apt update","command":"apt-get -y update","ground":"background","voice":"update","allowParams": "false"}
{"trigger":"Pi temperature","command":"python3 /home/pi/temperature.py","ground":"background","voice":"system temperature","voiceReply":"The pi temperature is {{result}} degrees","allowParams": "false"}
]
and on site it shows

Gnome Editor
Reboot
yum update
apt update

and i dot kow way evry time i refresh the page on site the token is a new one.
in: Your Computers it shows up like is connected.

[Russ]

@Călin-Cătălin-Alexandru, please paste the output of this command:

systemctl status triggercmdagent

The problem might be either that you haven't installed the background agent, or you ran the agent as your user instead of as root.

I recommend you try the steps on this page again, and make sure you run this command first: sudo su -

If you're not subscribed, you may need to delete your computer on the website before you re-run these steps because if you ran the agent as your non-root user, it would have created a .TRIGGERcmdData directory in your users's home directory, and created a computer associated with that data folder.

[Călin Cătălin Alexandru]

root@z3r0:~# systemctl status triggercmdagent
● triggercmdagent.service - TRIGGERcmd Agent
Loaded: loaded (/etc/systemd/system/triggercmdagent.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2020-07-28 18:39:58 EEST; 671ms ago
Main PID: 625 (node)
Tasks: 6 (limit: 4539)
CGroup: /system.slice/triggercmdagent.service
└─625 node /usr/share/triggercmdagent/app/src/daemon.js --run /root/.TRIGGERcmdData

Jul 28 18:39:58 z3r0.go.ro systemd[1]: Started TRIGGERcmd Agent.

[Călin Cătălin Alexandru]

https://imgur.com/a/pjRUKOO

[Călin Cătălin Alexandru]

looks like the problem was the last line in commands.json

i have delete: {"trigger":"Pi temperature","command":"python3 /home/pi/temperature.py","ground":"background","voice":"system temperature","voiceReply":"The pi temperature is {{result}} degrees","allowParams": "false"}
and now it works

[Russ]

Awsome, @Călin-Cătălin-Alexandru I'm glad you figured it out.